workstation
Quick Start – Lesson 10 – PID Control and HMI Program – Part 2
Quick Start – Lesson 10 – PID Control and HMI Program – Part 2
#Quick #Start #Lesson #PID #Control #HMI #Program #Part
“Bryon Lewis, PE”
Get the software at
Part 2 – Learn how to program the PID command block in Ladder Diagram (LD) and add a HMI faceplate and trending chart to control the PID Loop, LIC-100. We will program a transmitter simulator LIT-100.
Analog Input/Output…
source
To see the full content, share this page by clicking one of the buttons below |
This is older (retired) software, but looks and programs just like the latest software.
Download and install the software with activation at https://www.LearnControlSystems.com/plc_install.htm
Analog Input/Output Calculations and Count Values PDF in the video https://www.learncontrolsystems.com/1794-IE-4X0E2_Counts_Calcs.pdf
You don't need an Ethernet adapter and Flex I/O analog modules. Just configure SoftLogix for the modules and it builds the data structure in the controller tags to use in the program. Just put some ethernet network address in the ethernet adapter such as 0.0.0.0 for the ip address.