CWP panel
Getting the 1964 Comet Cyclone Back on the Road!
Getting the 1964 Comet Cyclone Back on the Road!
#Comet #Cyclone #Road
“Omar Ramirez”
A ton of work has been done to the Comet to get it on the road! All new brake system and cooling system, the Cyclone will be on the road in no time!
source
To see the full content, share this page by clicking one of the buttons below |
That throttle response…👍
Put disk breaks
The last thing I would not do is put tap water in the motor or Anti-Freeze, since you live where the weather doesn’t drop below 34 degrees. Go to a self serve pay water drinking machine station and at 35 cents a gallon would be nothing as compared to the rust that you will be getting in 5 days. Add a tablespoon of soluble oil lubricant for that bearing in that water pump. Trust me on what I’m telling you. My daily driver 66 F100 has been running on the same drinking purified water and water pump lubricant (soluble oil) for over 7 years without any issues & no rust whatsoever. Every 3 months I open up the radiator cap to look inside and I always notice the bottom radiator cap is bright clean without a hint of rust. And adding Anti-Freeze is a motor killer. If you blow a head gasket with Anti-Freeze in it , R.I.P Comet motor.
Congrats on the revival. I noticed the radiator hose kinked too. They will suck closed when hot. You don't want to cook the motor. 😁
Nice work on the brakes and your resourcefulness using existing parts!
Keep up the good work Omar!!!
Nice progress , sounds healthy . Still performing “ hit and run “ work on my ‘64 Galaxie convertible so I can drive it around .
look at the rear brakes again . The self adjusting cable is not centered and seated on the spring pin . The outer spring is not seated on the pin either . May cause a problem later …
Love the Comets. Nice work man & it sounds great.
Nice job sir! Using the same air cleaner on my 70 Torino. Very cool
Cranked right up…bro what’s that tool you used to flare the brake lines? Does it work on different size tubings?
nice ride and job getting it on the road
It sounds like someone has done some tweaking to that motor…… sounds great! Note: I just noticed that this car has a generator, not an alternator ….vintage OLD!
Great to see this Comet alive again. Keep up the great work. Please let me know when you order parts from CVF too. That offer stands.
Great video and good to see you getting her ready for the road……. Omar's Fine Ford Emporium…
What flare tool you using? I need to snag one and have been looking at a bunch of them. Need one for brake lines and up to 1/2" for a different thing.
Nice to see this comet getting ready for the first drive. She sounds great. Also, Nice that we'll get another video.
Hi Omar, Great job on the brakes, I’m glad you clean things up before you put parts together. Looks like you had a great time at Willow springs raceway.
Take care Buddy !
nice job, I have been working on my 64 Tbird, got the trans back from the shop and installed it yesterday and the engine just came back from the machine shop ready for reassembly and installation. enjoy your channel, cheers
Omar, it looks like space is gettin tight in your driveway and work area!
Keep up the good work and congrats on the rad👌
Good video Omar. I love 64 comets. Looks pretty solid
Nice! I had a 1964 Comet Caliente back in the late 1980's. Check out my 1964 Falcon on my channel. Just got it this spring.
you're a lucky man that car is awesome.