proxmox
Adding Drives to your Home Server Is EASY! …right?
Adding Drives to your Home Server Is EASY! …right?
#Adding #Drives #Home #Server #EASY
“Hardware Haven”
Get 10% OFF your Manta Sleep mask by using code hardware at
Check out the D8 Hybrid here:
UPTIME UPDATE:
5/17: At the time of publishing this video, it’s had 100% uptime for around 12 days (except for a few times where I had to shut it down to…
source
To see the full content, share this page by clicking one of the buttons below |
Brownies Recipe
Ingredients:
140 grams of chocolade
4 eggs
300 grams of sugar
120 grams of flour
250 grams of butter
Preparation:
1) Preheat the oven to 160 °C.
2) Beat the eggs with the sugar. Do this using a mixer.
3) Melt the chocolate with the butter.
4) Mix the egg mixture with the melted chocolate butter.
5) Mix in the flour.
6) Bake for 35 minutes in small in a large low mould.
I mean you might get better speeds with a M.2 to sata adapter but this is neater.
plus this could be a fairly substantial small backup drive storage.
Reminds me of a more modern Drobo 5C. But without the Drobo version of RAID built in.
Can you do a video like "cool things to do with rs232(serial port)"? Its 2024 and a lot of mobos still bring it. I guess its useless. Maybe you can show me i'm wrong LOL
It's hardly worth the $200 price tag seeing the build quality and simplicity of it.
It's a cheap enclosure + electronics of a 4 bay HDD to USB dock + 4 slow nvme readers + pcie packet switch so like total of $50-100 in electronics, and sell price should be like $150.
Man i wanna see you do lto video once… or bluray maybe
This seems to be just an external hard drive on steroids. I can see it in a video editor's office who comes with a MacBook and just plugs the usb-c in. Not for any networked/nas usage
For that pricetag, I would be tempted to get it as a local device-specific bulk storage device, but knowing that I can build my own bulk storage device for less than half that price, makes it a non-starter for me personally. But if they’re reliable long-term, I would definitely suggest someone else in my life to get that since that’s cheap enough and expandable enough to solve the problems of my less tech savvy friends and family.
good luck getting the full performance of those drives with the bottleneck of the single usb 3.2 port on the back. this is not a good replacement for a nas if you need fast data transfer speeds.
Keep running into the sata6 problem with proxmox 🤦♂️
USB4 would make more sense for having 4 nvme ports honestly
maybe if it has at least thunderbolt 3 or a nic.
Terramaster is one of those companies who's products usually make me go "That's cool, but it's also $20-60 more than I'm comfortable paying for that quality of device", and they almost broke the pattern with this one. NVMe storage is too expensive for those transfer speeds, but without those slots it's functionally the same device as it's predecessor, which had the same price problem as always.
at least your sponsor doesn't sell your user data, I might actually check them out… yes, please screen all your sponsors
Too many drawbacks for this to be viable. Seems like they just threw features at it to make it sounds good in marketing.
Always go for the G4 generation of the HP elitedesk machines, they have 10gb/s usb. I'm running Unraid on a HP ELITEDESK 800 G4 with an i5-8500T, internal nvme cache drive and a TerraMaster D6-320, which can hold up to 6 drives. Works great so far.
the F4-212 is not available or purchase yet, but it's been on their site for months
NO interest for me.
nice, to bad its still out of my reach
These manufacturers can't do an enclosure with a PCIe card half height half lenght for a better connectivity?
Also someone need to do the 10 inch rack if somebody really care about home rack. (Yes, it's a norm for home)
19:42
I'm sure it will work for years, look at the chia handbook, people have done it for 200TB total USB connected to usb pi's, much less a pc.
Might be nice for offsite backups
i have 2 hdd drives conecting with sata and im using truenas scale inside proxmox with sata controller passthrough , drives are mirror and im having the same problem with 0 speed transfering files frequently , what do u suggest?