VMware
5 Things I Would Do On Fresh Install Of ProxMox
5 Things I Would Do On Fresh Install Of ProxMox
#Fresh #Install #ProxMox
“Novaspirit Tech”
These are some of the steps I would perform on a fresh install of proxmox 8.0! thanks for the view!
○○○ LINKS ○○○
○○○ SHOP ○○○
Novaspirit Shop ►
Amazon Store ►…
source
To see the full content, share this page by clicking one of the buttons below |
I was hoping to see if there's any tutorial to check where if I will be using a video output to the proxmox server, it should preview the one of the vm inside the proxmox itself like Windows 10 vm thru a console or something.
do u have fix for proxmox network link to 100 mb, I have did fix this in past without physically changing my wire, there were some grub update
I like some of your videos but this one is superficial and clumsy. – at least in comparison to similar videos of technical YouTubers.
i would liek to see some network setup like setting up openwrt with two physical nics on host , or somethign like pihole , if possible cover something in that respect for next one in the series also if possible can we have a playlist because somethign tells me there is a lot more content potential on proxmox stuff we coudl se ahead so playlist to organise proxmox xontent would be nice 👌 Thanks for sharing this one, it was helpful indeed. Good Day!
That's a much easier way to pass an entire hard drive through.
Did not know that.
Thank you.
i need install proxmox in laptop and passthrough in laptop screen displayany help for tat
This is exactly what I needed.
As a total Prox noob, I appreciate your content. Thank you so much.
Another great video from you, thank You! I'm a newbie on Proxmox and i've been trying to install a Emby/Jellyfin server on a vm, but i really can't figure how this can see my movies and shows library available on the NAS. Samba is the way i guess, but can's acomplish without help! Can you please help me?
You should passthrough with device-id, not the sda naming, as that can change randomly, and totally mess up your setup.
You got another subscriber. Very clear and informational video. Thanks!
Nice vid, but for disk passthrough i would recommend not to use /dev/sda (this designation can change if you add or swap drives), instead use /dev/disk/by-id/"whatever hdd ID". If you cannot identify your drives based on default IDs, try installing package "sg3-utils-udev" and reboot. This package will create more aliases for your drives for easier identification, for example: "scsi-SHITACHI_HUS156060VLS600_2AVSUAMN"
Can you show passing through a GPU on Proxmox 8.
By far one of the best and concise Proxmox QuickStart vides. Thank you!
How would I set this up on a RPi cluster
Or HDD passthrough, it may be better to pass through /dev/disk/by-id/<disk-id>
Please state what level of experience you are expecting in your audience. This is NOT for beginners. Why do you bother to explain this in a way that experienced users probably already know how to do? This seems pointless.
What about HA mode? Are you going to show us that as well?
Just in time in a week I'm rebuilding my proxmox instances.
Hello, all!
If you want not to access a storage, you can toggle "Enabled" off, then the storage will not be available for the VM's/LXC"s, but all the other configs for that particular storage stay the same.
I'm still rocking V5. 😬
One thing I love about ProxMox is that it runs Debian under the hood giving you flexibility to add and modify features such as hardware pass-through. Plus if you know your way around Linux you can fix issues as well.
There is one feature I haven't explored yet is SDN. This is now fully baked in version 8.1.
When passing physical media through to a VM. Especially for a NAS. I recommend enabling the iothread option. This gives them their own thread instead of using the Proxmox event loop. Think it's enabled by default when using the UI.
Only the "P" is capitalized in "Proxmox", in spite of the logo. Excellent, thorough video! Thanks!
amd_iommu=on is actually invalid (and therefore ignored) because it is on by default for AMD systems. You should still use iommu=pt however.
Your videos are always so resourceful. 🔥 Changed my mindset i had about proxmox finally😂
Since proxmox is Debian based, zram-tools and log2ram goes a VERY long way in reducing writes to the EMMC/USB/SD card.
Next , a GPU passthrough !!!
Tk U for sharing, will give ProMox a try
A video for proxmox 8.x on arm64 would be interesting.