VMware
MS-01 First Look, An All-New Ultra Fast Mini PC With
MS-01 First Look, An All-New Ultra Fast Mini PC With GPU Support! Hands On
#MS01 #AllNew #Ultra #Fast #Mini
“ETA PRIME”
In this video we go hands on with the all new minis forum MS-01, An ultra Fast Mini PC workstation that you can add a low profile GPU to! With Dual 10 Gigabit Ethernet USB 4, A 14 Core i9 CPU and a Super Small form facto this new mini pc is FAST.
Learn More about The MS-01 Here:…
source
To see the full content, share this page by clicking one of the buttons below |
Everybody dogs on the 6400xt! It’s a wonderful 1080 p gaming gpu! Just drop it in any computer basically!
Does the Nvidia Tesla p4 LP (just need vGPU on Proxmox for my CEPH Cluster) fits in the MS-01? Best regards
Love to see tests of a GPU specifically for video editing…
In addition to see your testing treatment on this machine with MORE graphics power, I’d like to see how it fares with LESS. Can you do a video testing it as it ships? Using the iGPU?
I’m new to the channel and greatly enjoy your videos. You have a way of enthusiastically presenting but with no hype. Please keep up the great work.
Can I put a 4070 on it with razer?
👍👍👍👍👍
@ETA PRIME any chance you can ask minisforum about the A2000 compatibility situation? Seems a little misleading as the only way to fit an a2000 is to find a VERY difficult to source mobile version put onto a desktop PCB, or as they showed in a recent video, swap out the low profile A2000 OEM cooler for a single slot height cooler, which can't be purchased anywhere, and seems to be only able to be custom made. Thanks, hopefully you see this
This is slot pcie support rtx 4000 series?
Could you do a video where you plug a egpu via thunderbolt? Is that possible?
Hello, do you think a GIGABYTE Radeon RX 6400 4GB GDDR6 PCI Express 4.0 Low Profile Video Card GV-R64D6-4GL would fit this? I'm ordering the MS-01 today and am looking for a good card but a lot are out of stock. Thanks everyone!!
Seems like it could have been nicer with Ryzen 9 7940HS to get a better integrated GPU. In the long term, there will likely be something better than an RTX 4060 LP which actually fits in the single width PCIe slot.
Does the front minis forum ms-01 audio jack require a trs or trrs connector?
Have you considered looking at the GZOSMETA EG01 eGPU enclosure kit and test with a bigger GPU?
What about PCI X16 extender with 4090?
Hopefully we can revisit this mini pc with some other gpu options, as well as egpu performance. I'm curious about how u will shoehorn the A2000 in
A Galax GTX1070 KATANA will be perfect for this
Wait, but is a desktop RX6400 better than a laptop RX6600?
I'm wondering if this is actually better than that other Minisforum miniPC.
That is absolutely insane for the size. I want one
Whats the name of the keyboard….
Does it have a IPMI/KVM interface?
I'm drooling to get this for my homelab but I can't justify it. My Raspberry Pi5 is doing a great job with CasaOS for now while sipping much lower power. 😅
Could be possible to install a Low Profile RTX 4060? if it needs more power then use a more wattage power supply?
Is this compatible with a egpu?
I would be very interested to see a high end GPU installed. I have this unit on order but wasn't sure what GPU would fit while providing the best performance.
Laptop will be cheaper & better.
Stop hawking this chinese crap.
Thanks lot for useful information, especially regarding GPU.
sucks you cant put A2000 in there, would be a great device otherwise!
I get the appeal of small, but I think these are just **too** small for their own good.
See, I don't the issue if it was ever so slightly bigger to accommodate dual-slot cards, there are like 4 times the choices if you go like that, even the RTX4060 has one now, missed opportunity just for the sake of "going small".
Regardless, amazing thing with that huge thing out
Looks like a perfect SSD nas!
I would just buy a second hand, 50k mile, $10k economy car. I dont care about performance, so a 3 to 4 cylinder with 40mpg, will get a combined cost of around $20k for the first 100k miles.
Unfortunate there's no choice of CPU vendor. Intel 10nm process with "efficiency cores" is not for me. Otherwise, it's interesting, thanks for the look over.
i have an rx 6500 XT it gpu. cn that fit in this? i need a computer that can make and store alot of music and have multiple ssds i was planning to buy enclosures for but if my gpu is compatible with this then i wont have to 😎😎😎
Cut the case
Does it support rtx 4060 low profile?
At 1:41
Rear I/O….
You failed to mention the two USBC connectors between the HDMI and the ethernet….
yes i would love to see the a2000, would really like to see Ark SE although i know you never run that. Keep up the great work!
I need a mini Pc for dental design software what will be the best GPU for this machine ?? Can I use a quadro GPU??
Круть)))
no mentioning about the two usb4 ports on the back at all????
Will the PCIe do 2×8 or 4×4 bifurcation?
Nice mini workstation 👍 with i9-13900H (14c/20t) + RX6400, showing decent power consumption at-the-wall. Guessing maybe it is not quiet. (I remain p4r4n01d about ITD Intel Thread Director though I probably should not be.)
Another incredible year of content from you ETA — THANK YOU 🎉❤
Kindest regards, friends and neighbours.
oh it has a intel cpu …. no thanks intel sucks!
Reminds of those modem/router in the form factor.
What about Rtx 4060 low profile?
Looks like it won't fit A2000 GPU as claimed. I have searched high and low for a single slot A2000 and found none. To be fair Minisforum did mention A2000 MOBILE for whatever that means.
Brother can you give me a mini pc please