Mining

TURNING ON 30 GPU’s FOR MINING LETS GO! maybe not…

TURNING ON 30 GPU’s FOR MINING LETS GO! maybe not…

#TURNING #GPUs #MINING #LETS #not..

“Red Panda Mining”

Coin Mining Central use code RPM for £100 OFF!
Tangem Wallet use code RPM for 10% OFF! My favorite and best way to store my Bitcoin and many other cryptocurrencies!

Trusted Crypto Mining Hardware…

source

 

To see the full content, share this page by clicking one of the buttons below

Related Articles

49 Comments

  1. Ah yes. The “moved the rig and now it’s not working issue” 😂 I literally just moved an Octominer to another rack but I kept it running while I moved it cause I was afraid of that very thing happening 🤣

  2. Take heart the the pices of dirt that caused that mark was already there before you moved it. It's just coincidence.
    Clean the PCIE connector on the gpu, and try it in a test rig. I use a Fiber Pencil. You could use P1200grit paper.
    Mark that PCIE slot in the MOBO as questionable.

  3. Usually things don't run smoothly mining I notice when you've got lots of time to deal with the problems it doesn't happen but when you don't have much time it will give you an error or a GPU that's not working lol

  4. I did not do any violations at all but it it banned me from discord you're Bot is broken and I'm not sure why reason: account violates rules 2, 3, 5, 7 account is also a shill account used to bait unsuspecting users into falling for a scheme I only create YouTube content I'm very confused please let me know what the scam is so I can rectify it if this is the case

  5. 12:08 If you have a heat gun handy, you can check for cold cards.. or just us your fingermeter. 👉🔥
    Thank you for the surprise today @redpandamining A great way to start the New Year. 🙂

  6. That 3080 needs repairs, because that is shorted on 12v (i m repair technician of video cards) dont put that card again! it was not your fault, that gpu was going to die anyway

  7. @Redpandamining

    I'd swap out the malfunctioning fan on the 3080, I wouldn't be able to rest peacefully with the thought that something might overheat and possibly lead to a fire.

  8. When you have a malfunction a fast reboot is not enough to get the card/pci to reset.
    Hiveos shut down and reboot on 30 sec function should reset the pci and resolve the issue unless the card is broken.

  9. Went through 3 sets of fans on my strix 3090. Picked up a white set, going strong for 14 months. No more thermal pads, has custom copper plate with 3 tubes of thermal grizzly kryonaut sandwiched in between. Temps are great!

  10. Is your Electricity price including the distribution and transmission fees?
    I'm locked in at 7.25, but when I include all the other fees, ( divided total bill by power used ) the actual rate is 16.25.
    What about other people? what are you paying?
    Thanks!

  11. Something to think about…not everybody has access to an Octominer…show how disconnected you are sometimes…might turn off new subscribers…just my two cents

  12. Touching these PCI-e pin's on the GPU's are not optimal for good connections. They can safely be wiped with isopropyl alchohol once touched 🙂
    (comment not really intended for RPM, as he know's what he's doing)

  13. My msi 3080 gaming trio has a bad fan when I replaced it, it still gets stuck and resets rig, but if I put it in my computer which I’ve had for 5 months now. It’s fine lol.

  14. @redpandamining what wallet are you using in canada? I've tried setting up hive but it won't accept any wallet address I put it. Amd chance you could put a video up of what exchanges/wallets work in canada for hive?

  15. 00:57 unreal. nanobeam FTW

    02:32 Zotac, Asus, PNY, Gigabyte all fail if you run them long term over 80% but they're just fine if you aren't an animal.

    18:00 some of those will take almost no overclocks. might have to drop clocks a bit.

    18:20 90HX sucks balls at everything. (see my video)

Leave a Reply