VMware
Upgrading my main machine to 10GbE
Upgrading my main machine to 10GbE
#Upgrading #main #machine #10GbE
“clabretro”
Upgrading my main machine from 2.5GbE to 10GbE with a 10Gtek X520-10G-1S-X8 to take advantage of the 10GbE aggregate switch I have connected to my TrueNAS server.
This NIC uses the Intel 82599EN controller, which doesn’t have support for Windows 11. I had to download version 25.0 of the driver…
source
To see the full content, share this page by clicking one of the buttons below |
why tf do you have that in your house
U save me bro <3
Check your motherboard block diagram to see if the PCIE slot you used goes directly to the CPU, or goes around via the chipset (which might be slower).
Thank you for the links you provided.
need help i downloaded the link ran it but says my driver version in device manager is 4. 1. 196. 0 is this the version I want? or did it not work
Hi I’m looking for a 10gbe network card sfp+ for windows 11
Anyone else getting the Error occurred loading diagnostic click refresh and it just keeps looping that error? I can get it to blink/identify on the card but nothing further.
Does X520 DA2 work with truenas scale and windows server 2022 ?
You saved my bacon on a different 10Gtek 10gig adapter. Intel X540-10G-2T-X8. Just downloaded the version linked, installed, and instantly worked. Broke my onboard NIC on ASUS B650E-E but I don't care because my dual 10G nic works.
Thanks man. Highly appreciate it
Oh boy, all the stuff with Windows 11 and drivers/hardware issues are just… so reminiscent of Vista.
I never got above 5 Gbit with CAT5e cables
You should take a look at iperf (3) and see if you can get close (95%+ to wire speed…)
low speed for 10gbe
Ever thought about using SFP+ Optical instead of a dac ?